16.0.141 (7/27/2011)
1. Fixed: IR learning was not working properly.
2. Changed: Updated madVR to version v0.71 (fixes green tint in Red October HQ).
3. Fixed: Google Image click-detection was not working in some cases.
4. Changed: Tuning to instructions added in build 140 (only shown once per run, larger font size, better bubble sizing, etc.)
5. Changed: JRWorker will try to use EVR in thumbnail building if it is found on the computer. Previously JRWorker only tries to use EVR on Vista or higher OS's.
6. NEW: The sidecar subtitle selection will persist between plays, just like it does for stream-based subtitle selection.
7. NEW: When showing a message box in Display View when the last used user-interface mode was Theater View, the message box will be a Theater View style message instead of a Standard View style message.
8. Faster: Artist thumbnail views load much faster (previously switching to an artist view would wait while the cover art folder was analyzed but now this happens in a low-priority background thread; especially helpful if cover art is on a drive that spins down).
9. Changed: Display modes with an integer refresh rate of 23 or lower would not appear in Media Center.
10. NEW: When multiple playlists are selected in the tree, they can be deleted with a right-click.
16.0.140 (7/26/2011)
1. NEW: Added on screen instructions that appear when entering Theater View and Display View.
2. Fixed: Re-entering Theater View could crash in some cases.
3. Fixed: Red October playback could fail if a user installed an older Media Center build, then a new one, then an old one again. The filter pack could get out of sync.
4. Fixed: When simply dumping video graph info to a log file, Media Center could set a lock and attempt downloading a filter pack update.
5. Changed: When viewing a list of television recordings in Theater View from the same series, 'Watch' plays a single episode and 'Watch All' is offered to play all episodes (starting at the selected episode).
Thursday, July 28, 2011
Tuesday, July 26, 2011
The builds 127-139
16.0.139 (7/25/2011)
1. Changed: Updated madVR to version v0.70.
16.0.138 (7/25/2011)
1. Fixed: Updated handler for Google Images so that setting cover art, downloading images, etc. works with the latest Google Images page format.
2. Changed: Updated the French language translation (thanks to Jean-Guy Paquette).
3. NEW: Updated madVR to version v0.69 (which brings back the improved VideoClock performance when using madVR).
4. NEW: Updated the ffdshow used by Red October to the latest version.
5. Changed: Video width and height are filled in during import time, with expectation that more accurate values may be found later at thumbnailing time. Previously we only fill in the values at thumbnailing time.
6. Changed: Added LAV Video Decoder to the Red October + Additional Filters white list.
7. Fixed: Playing files that could not be found would show an error and then could leave the player in an in-between state.
8. Changed: Merged and improved the playback error messaging for Access Control filtering, NTFS permissions issues, optical discs that aren't found, etc.
9. Changed: If FFDShow video decoder fails to connect to video renderer, a second attempt is made with FFDShow's output formats narrowed to RGB.
10. Changed: When building DirectShow graph for ms-dvr/wtv files, video renderer will be changed to default renderer only if the default is EVR, and the change will not be made when the graph is built for thumbnailing.
11. Fixed: Blu-ray (PGS) subtitles could have their red and blue color components switched.
16.0.137 (7/22/2011)
1. Fixed: Using VideoClock + EVR could cause playback to stall.
2. Changed: Export Playlist > Text File (delimited) uses UTF-8 instead of UTF-16.
16.0.136 (7/21/2011)
1. Fixed: Party Mode was allowing a user to switch libraries.
2. Fixed: If Theater View failed to create a 3D device (due to madVR exclusive mode, etc.) it could lead to a crash.
3. Changed: madVR is auto-configured when first installed or when upgraded by Red October (user configuration performed after that will be preserved).
4. Changed: When LAV CUVID fails to connect to a video format with Red October HQ, a different decoder will automatically be used (previously it could result in a playback error).
5. Fixed: When filters and other dependencies were updated, some old files from the previous install were not cleaned up.
6. Changed: Added support for more Sub Station Alpha (ASS/SSA) formatting.
7. Changed: When Blu-ray playback fails because a reader is not installed, a more helpful message is displayed.
8. Changed: Revised the default color lookup table used for VOB subtitles with no explicit color table.
9. Fixed: VOB and EVOB subtitles could be in the incorrect spot with some movies.
16.0.135 (7/21/2011)
1. Fixed: Extended ANSI characters could be read incorrectly (only applies to build 134).
2. Fixed: DVD playback from a UNC path was not working.
16.0.134 (7/20/2011)
1. Fixed: Text based subtitles were not working.
2. NEW: Added support for VMR9 to the J. River subtitle engine (quality may not look as good as with EVR or madVR when playing low resolution content due to limitations of VMR overlay drawing).
3. Fixed: Dolby Digital Plus bitstreaming was not working properly.
4. Changed: Improved error messaging for a few video playback error conditions.
5. Changed: Revised how video stopping works to be more efficient and to work better with madVR exclusive, VideoClock, etc.
6. Fixed: Gapless playback of HE-AAC files was not working properly.
7. NEW: Improved support for touch screen flick scrolling with Theater View.
16.0.133 (7/19/2011)
1. NEW: MC will show a warning popup when a user schedules too many television recordings to be handled by the available tuner devices.
2. Changed: Updated German language file (thanks Bytestar).
3. Fixed: The path combobox on the Import Single Folder page could be tricky to type in while the import was searching for the recommended folders that are shown in the drop box.
4. Fixed: Import would not always read tags (only applies to last few builds).
5. Fixed: Clicking on a library root on an empty library could cause a crash.
6. NEW: Added native support for MicroDVD .SUB files (naming must use [Name]*.sub and be next to the video or in a 'Sub', 'Subs', 'Subtitle' or 'Subtitles' subfolder).
7. Changed: Export Playlist > Text File (delimited) uses UTF-16 instead of ANSI for better international character support.
8. Changed: Export Playlist > HTML uses UTF-8 instead of ANSI for better international character support.
9. NEW: Added support for text-based UTF-8 subtitles that are embedded into a file.
10. Fixed: In some cases, text-based subtitles would fail to render.
11. Changed: Switched back to previous version of MadVR video renderer because of some instability in the .67 version.
12. Fixed: MC could not import tags nor play mp4/m4a files which did not conform to ISO specifications.
16.0.132 (7/18/2011)
1. NEW: Added native support for embedded VOB subs.
2. NEW: Added support for any number of external SRT subtitle files (naming must be [Name]*.srt where * is an identifier (or empty); if .srt files are in a subfolder the folder name must be 'Sub', 'Subs', 'Subtitle' or 'Subtitles').
3. NEW: Added native support for Enhanced VOB (EVOB) subtitles.
4. NEW: Updated to version .30 of LAV audio and splitter directshow filters.
5. NEW: Updated to version .67 of madVR video renderer filter.
6. NEW: VideoClock slaves the audio exactly to the refresh rate of madVR using IMadVRRefreshRateInfo instead of running a separate monitoring thread (better accuracy, better performance, and no need for a device that can cause problems with exclusive mode).
7. Fixed: Audio track selection on DVD sources wasn't always working when sending to dlna and handheld devices.
16.0.131 (7/15/2011)
1. NEW: Added native support for SSA, ASS, and ASS2 text-based subtitle formats.
2. NEW: Added native support for sidecar subtitle files using SRT or IDX+SUB.
3. NEW: The new subtitle engine allows choosing between multiple sidecar formats, languages inside the sidecar formats, and multiple streams from the right-click menu and/or on screen display.
4. Fixed: The J. River Subtitle Renderer could cause video to stall when first starting.
5. Fixed: The J. River Subtitle Renderer works better when switching subtitles on and off.
16.0.130 (7/13/2011)
1. NEW: Added J. River Subtitle engine, currently used with Red October for Blu-ray subtitles only ( more here: http://yabb.jriver.com/interact/index.php?topic=65269.0 ).
2. Changed: Improved the generic playback problem message shown when playback fails (and added a link to the wiki when not in Theater View where a webpage would be unfriendly).
3. Changed: If playback of a video from Theater View failed, a playback problem message could be shown with a regular message box instead of a Theater View friendly message box.
4. Fixed: If a message box was shown right as Theater View was loading, it could render incorrectly.
5. Changed: Live television uses JRSS center-focused mixing for 2.0 to 5.1/7.1 conversion.
16.0.129 (7/11/2011)
1. Changed: BDMV import now analyzes the physical file so that compression information, frame rate, duration, etc. are gathered (use Update Library (from tags) on existing BDMV files).
2. Fixed: Bookmarking would not be used for videos with no duration.
3. Fixed: Pseudo-surround detector could false positive in some cases.
4. Fixed: Possible hang from a circular reference when a relational field contained stacked files.
5. Fixed: Improved performance of the database when it contains many relational fields.
6. Fixed: DLNA conversion to MPEG2/DVD with PS3 compat switch set wasn't working on the PS3.
7. Changed: Parametric Equalizer changes are saved as they are made instead of at shutdown (so a crash won't cause settings to be lost).
8. Changed: When editing Parametric Equalizer parameters, the changes are applied after a user stops making changes for a bit (so typing "200" won't first load "2" then "20" then "200").
9. Fixed: Options > Video > Bitstreaming could show the incorrect value.
10. Fixed: Right-click menu did not work properly when time-shifting on certain analog television tuners.
11. Changed: Only the most recent "New Media Action" dialog is shown.
12. Fixed: With certain subtitle settings, the default subtitle selection for some files could be incorrect.
13. Changed: Disabled auto-resume functionality for DLNA renderers (to return as an option later).
16.0.128 (7/8/2011)
1. Fixed: Subtitles could incorrectly default to on with some videos.
2. Changed: Refinement to the center-focus JRSS mixing used for 2.0 to 5.1 / 7.1 video playback that was introduced in 16.0.127.
3. Changed: Added MPC-HC video decoder to the white-list for Red October with additional filters.
4. Changed: Improved the pseudo 5.1 detector used by JRSS.
5. Fixed: Auto-import could import temporary files created while doing file conversion.
6. NEW: Red October HQ will use LAV CUVID when possible.
16.0.127 (7/7/2011)
1. NEW: Added Options > General > Resume playback using bookmarks. Available modes are Automatic, Never, and Ask.
2. Changed: Bookmarks are not used for videos that are shorter than 15 minutes.
3. NEW: Added support for JRSS 5.0 downmixing to 4.0 and 2.0.
4. Fixed: DTS WAV files would play as static.
5. Fixed: During conversion and handheld upload, the program could freeze for a couple of seconds while tagging was performed.
6. Changed: DLNA control track advancement is more robust, especially for devices that don't nicely support event subscriptions.
7. Fixed: WAV plugin was broken since build 122/123.
8. Changed: Updated libogg to 1.2.2 and libvorbis to 1.3.2
9. Changed: Improved JRSS 2.0 to 5.1 / 7.1 mixing engine when used with videos. Dialog is partially shifted from the main speakers to the center. Audio and music video playback still leaves the front mains untouched.
10. NEW: JRSS mixing detects pseudo 5.1 (2.0 content inside a 5.1 container) and upmixes it to 5.1 / 7.1.
11. Changed: Using oggenc 2.87.
1. Changed: Updated madVR to version v0.70.
16.0.138 (7/25/2011)
1. Fixed: Updated handler for Google Images so that setting cover art, downloading images, etc. works with the latest Google Images page format.
2. Changed: Updated the French language translation (thanks to Jean-Guy Paquette).
3. NEW: Updated madVR to version v0.69 (which brings back the improved VideoClock performance when using madVR).
4. NEW: Updated the ffdshow used by Red October to the latest version.
5. Changed: Video width and height are filled in during import time, with expectation that more accurate values may be found later at thumbnailing time. Previously we only fill in the values at thumbnailing time.
6. Changed: Added LAV Video Decoder to the Red October + Additional Filters white list.
7. Fixed: Playing files that could not be found would show an error and then could leave the player in an in-between state.
8. Changed: Merged and improved the playback error messaging for Access Control filtering, NTFS permissions issues, optical discs that aren't found, etc.
9. Changed: If FFDShow video decoder fails to connect to video renderer, a second attempt is made with FFDShow's output formats narrowed to RGB.
10. Changed: When building DirectShow graph for ms-dvr/wtv files, video renderer will be changed to default renderer only if the default is EVR, and the change will not be made when the graph is built for thumbnailing.
11. Fixed: Blu-ray (PGS) subtitles could have their red and blue color components switched.
16.0.137 (7/22/2011)
1. Fixed: Using VideoClock + EVR could cause playback to stall.
2. Changed: Export Playlist > Text File (delimited) uses UTF-8 instead of UTF-16.
16.0.136 (7/21/2011)
1. Fixed: Party Mode was allowing a user to switch libraries.
2. Fixed: If Theater View failed to create a 3D device (due to madVR exclusive mode, etc.) it could lead to a crash.
3. Changed: madVR is auto-configured when first installed or when upgraded by Red October (user configuration performed after that will be preserved).
4. Changed: When LAV CUVID fails to connect to a video format with Red October HQ, a different decoder will automatically be used (previously it could result in a playback error).
5. Fixed: When filters and other dependencies were updated, some old files from the previous install were not cleaned up.
6. Changed: Added support for more Sub Station Alpha (ASS/SSA) formatting.
7. Changed: When Blu-ray playback fails because a reader is not installed, a more helpful message is displayed.
8. Changed: Revised the default color lookup table used for VOB subtitles with no explicit color table.
9. Fixed: VOB and EVOB subtitles could be in the incorrect spot with some movies.
16.0.135 (7/21/2011)
1. Fixed: Extended ANSI characters could be read incorrectly (only applies to build 134).
2. Fixed: DVD playback from a UNC path was not working.
16.0.134 (7/20/2011)
1. Fixed: Text based subtitles were not working.
2. NEW: Added support for VMR9 to the J. River subtitle engine (quality may not look as good as with EVR or madVR when playing low resolution content due to limitations of VMR overlay drawing).
3. Fixed: Dolby Digital Plus bitstreaming was not working properly.
4. Changed: Improved error messaging for a few video playback error conditions.
5. Changed: Revised how video stopping works to be more efficient and to work better with madVR exclusive, VideoClock, etc.
6. Fixed: Gapless playback of HE-AAC files was not working properly.
7. NEW: Improved support for touch screen flick scrolling with Theater View.
16.0.133 (7/19/2011)
1. NEW: MC will show a warning popup when a user schedules too many television recordings to be handled by the available tuner devices.
2. Changed: Updated German language file (thanks Bytestar).
3. Fixed: The path combobox on the Import Single Folder page could be tricky to type in while the import was searching for the recommended folders that are shown in the drop box.
4. Fixed: Import would not always read tags (only applies to last few builds).
5. Fixed: Clicking on a library root on an empty library could cause a crash.
6. NEW: Added native support for MicroDVD .SUB files (naming must use [Name]*.sub and be next to the video or in a 'Sub', 'Subs', 'Subtitle' or 'Subtitles' subfolder).
7. Changed: Export Playlist > Text File (delimited) uses UTF-16 instead of ANSI for better international character support.
8. Changed: Export Playlist > HTML uses UTF-8 instead of ANSI for better international character support.
9. NEW: Added support for text-based UTF-8 subtitles that are embedded into a file.
10. Fixed: In some cases, text-based subtitles would fail to render.
11. Changed: Switched back to previous version of MadVR video renderer because of some instability in the .67 version.
12. Fixed: MC could not import tags nor play mp4/m4a files which did not conform to ISO specifications.
16.0.132 (7/18/2011)
1. NEW: Added native support for embedded VOB subs.
2. NEW: Added support for any number of external SRT subtitle files (naming must be [Name]*.srt where * is an identifier (or empty); if .srt files are in a subfolder the folder name must be 'Sub', 'Subs', 'Subtitle' or 'Subtitles').
3. NEW: Added native support for Enhanced VOB (EVOB) subtitles.
4. NEW: Updated to version .30 of LAV audio and splitter directshow filters.
5. NEW: Updated to version .67 of madVR video renderer filter.
6. NEW: VideoClock slaves the audio exactly to the refresh rate of madVR using IMadVRRefreshRateInfo instead of running a separate monitoring thread (better accuracy, better performance, and no need for a device that can cause problems with exclusive mode).
7. Fixed: Audio track selection on DVD sources wasn't always working when sending to dlna and handheld devices.
16.0.131 (7/15/2011)
1. NEW: Added native support for SSA, ASS, and ASS2 text-based subtitle formats.
2. NEW: Added native support for sidecar subtitle files using SRT or IDX+SUB.
3. NEW: The new subtitle engine allows choosing between multiple sidecar formats, languages inside the sidecar formats, and multiple streams from the right-click menu and/or on screen display.
4. Fixed: The J. River Subtitle Renderer could cause video to stall when first starting.
5. Fixed: The J. River Subtitle Renderer works better when switching subtitles on and off.
16.0.130 (7/13/2011)
1. NEW: Added J. River Subtitle engine, currently used with Red October for Blu-ray subtitles only ( more here: http://yabb.jriver.com/interact/index.php?topic=65269.0 ).
2. Changed: Improved the generic playback problem message shown when playback fails (and added a link to the wiki when not in Theater View where a webpage would be unfriendly).
3. Changed: If playback of a video from Theater View failed, a playback problem message could be shown with a regular message box instead of a Theater View friendly message box.
4. Fixed: If a message box was shown right as Theater View was loading, it could render incorrectly.
5. Changed: Live television uses JRSS center-focused mixing for 2.0 to 5.1/7.1 conversion.
16.0.129 (7/11/2011)
1. Changed: BDMV import now analyzes the physical file so that compression information, frame rate, duration, etc. are gathered (use Update Library (from tags) on existing BDMV files).
2. Fixed: Bookmarking would not be used for videos with no duration.
3. Fixed: Pseudo-surround detector could false positive in some cases.
4. Fixed: Possible hang from a circular reference when a relational field contained stacked files.
5. Fixed: Improved performance of the database when it contains many relational fields.
6. Fixed: DLNA conversion to MPEG2/DVD with PS3 compat switch set wasn't working on the PS3.
7. Changed: Parametric Equalizer changes are saved as they are made instead of at shutdown (so a crash won't cause settings to be lost).
8. Changed: When editing Parametric Equalizer parameters, the changes are applied after a user stops making changes for a bit (so typing "200" won't first load "2" then "20" then "200").
9. Fixed: Options > Video > Bitstreaming could show the incorrect value.
10. Fixed: Right-click menu did not work properly when time-shifting on certain analog television tuners.
11. Changed: Only the most recent "New Media Action" dialog is shown.
12. Fixed: With certain subtitle settings, the default subtitle selection for some files could be incorrect.
13. Changed: Disabled auto-resume functionality for DLNA renderers (to return as an option later).
16.0.128 (7/8/2011)
1. Fixed: Subtitles could incorrectly default to on with some videos.
2. Changed: Refinement to the center-focus JRSS mixing used for 2.0 to 5.1 / 7.1 video playback that was introduced in 16.0.127.
3. Changed: Added MPC-HC video decoder to the white-list for Red October with additional filters.
4. Changed: Improved the pseudo 5.1 detector used by JRSS.
5. Fixed: Auto-import could import temporary files created while doing file conversion.
6. NEW: Red October HQ will use LAV CUVID when possible.
16.0.127 (7/7/2011)
1. NEW: Added Options > General > Resume playback using bookmarks. Available modes are Automatic, Never, and Ask.
2. Changed: Bookmarks are not used for videos that are shorter than 15 minutes.
3. NEW: Added support for JRSS 5.0 downmixing to 4.0 and 2.0.
4. Fixed: DTS WAV files would play as static.
5. Fixed: During conversion and handheld upload, the program could freeze for a couple of seconds while tagging was performed.
6. Changed: DLNA control track advancement is more robust, especially for devices that don't nicely support event subscriptions.
7. Fixed: WAV plugin was broken since build 122/123.
8. Changed: Updated libogg to 1.2.2 and libvorbis to 1.3.2
9. Changed: Improved JRSS 2.0 to 5.1 / 7.1 mixing engine when used with videos. Dialog is partially shifted from the main speakers to the center. Audio and music video playback still leaves the front mains untouched.
10. NEW: JRSS mixing detects pseudo 5.1 (2.0 content inside a 5.1 container) and upmixes it to 5.1 / 7.1.
11. Changed: Using oggenc 2.87.
Friday, July 8, 2011
The builds 123-126
16.0.126 (7/6/2011)
1. NEW: Added support for gapless AAC playback (requires iTunSMPB header).
2. NEW: Added native DFF and DSF file support. Output is as 64-bit PCM data with an 8:1 resample (normally 352800 Hz).
3. Fixed: Re-starting time-shifting after stopping time-shifting on digital television tuners could cause MC to crash.
4. Fixed: MC could crash in some instances when starting television in time-shifting mode.
5. Fixed: In certain cases customizing Theater View's layout could lead to a crash.
6. Fixed: Unnesting a Theater View library view could break navigation in certain cases.
7. Fixed: Import of some OGG files could hang.
16.0.125 (7/5/2011)
1. Changed: Improved internal volume mode handling for television playback.
2. Fixed: Right-click menu did not work properly for some analog television/video capture devices.
3. Fixed: 'Volume Protection' could incorrectly reduce the volume when starting playback if the previous track was not stopped before starting the new play.
4. Fixed: DVD aspect ratio could be incorrect.
5. Changed: Updated Russian translation file (thanks to Vladimir).
6. NEW: Added a video playback option to allow compensating for audio / video synchronization issues due to input lag, custom DSP processing, etc. (Options > Video > Advanced > A/V sync correction milliseconds).
7. Fixed: Analyzing audio with multiple files at a time could lead to a hang.
8. Fixed: Pressing TAB in an edit-style option could lead to unexpected results.
9. Faster: Improved performance of core audio engine.
16.0.124 (6/30/2011)
1. NEW: When controlling a DLNA device, if the device is turned off and later turned on, playback will resume. Allows picking a mix playlist and then turning a device on and off to control music without requiring additional user interaction.
2. Fixed: Some complex expressions could fail to save properly in the recent list of the 'Rename, Move, & Copy Files...' dialog.
3. Fixed: Options > Services listed YouTube playback bitrate twice.
4. Changed: If video playback is stopped near the end of the file (within 4%), no bookmark is saved.
5. Fixed: Theater View would not stay minimized properly when running external programs.
6. Changed: Reduced the maximum allowable primary buffering for DirectSound, Kernel Streaming, WaveOut, and WASAPI from 5 seconds to 1 second (500ms or less is recommended).
7. Fixed: Manufacturer name for JRService.exe was showing as "Unknown" in msconfig and other utilities for viewing services.
8. Changed: The DLNA server will not try to convert URL's in the database even if conversion is forced. This allows URL's (like streaming radio) to be played on devices that support it (like WDTV).
9. Changed: The TiVo server will not try to convert URL's in the database even if conversion is forced. This should allow mp3 URL's (like shoutcast) to be played. Needs testing.
10. Changed: Improved internal volume mode handling for video and DVD playback.
16.0.123 (6/29/2011)
The same as 16.0.122 (numbering error)
1. NEW: Added support for gapless AAC playback (requires iTunSMPB header).
2. NEW: Added native DFF and DSF file support. Output is as 64-bit PCM data with an 8:1 resample (normally 352800 Hz).
3. Fixed: Re-starting time-shifting after stopping time-shifting on digital television tuners could cause MC to crash.
4. Fixed: MC could crash in some instances when starting television in time-shifting mode.
5. Fixed: In certain cases customizing Theater View's layout could lead to a crash.
6. Fixed: Unnesting a Theater View library view could break navigation in certain cases.
7. Fixed: Import of some OGG files could hang.
16.0.125 (7/5/2011)
1. Changed: Improved internal volume mode handling for television playback.
2. Fixed: Right-click menu did not work properly for some analog television/video capture devices.
3. Fixed: 'Volume Protection' could incorrectly reduce the volume when starting playback if the previous track was not stopped before starting the new play.
4. Fixed: DVD aspect ratio could be incorrect.
5. Changed: Updated Russian translation file (thanks to Vladimir).
6. NEW: Added a video playback option to allow compensating for audio / video synchronization issues due to input lag, custom DSP processing, etc. (Options > Video > Advanced > A/V sync correction milliseconds).
7. Fixed: Analyzing audio with multiple files at a time could lead to a hang.
8. Fixed: Pressing TAB in an edit-style option could lead to unexpected results.
9. Faster: Improved performance of core audio engine.
16.0.124 (6/30/2011)
1. NEW: When controlling a DLNA device, if the device is turned off and later turned on, playback will resume. Allows picking a mix playlist and then turning a device on and off to control music without requiring additional user interaction.
2. Fixed: Some complex expressions could fail to save properly in the recent list of the 'Rename, Move, & Copy Files...' dialog.
3. Fixed: Options > Services listed YouTube playback bitrate twice.
4. Changed: If video playback is stopped near the end of the file (within 4%), no bookmark is saved.
5. Fixed: Theater View would not stay minimized properly when running external programs.
6. Changed: Reduced the maximum allowable primary buffering for DirectSound, Kernel Streaming, WaveOut, and WASAPI from 5 seconds to 1 second (500ms or less is recommended).
7. Fixed: Manufacturer name for JRService.exe was showing as "Unknown" in msconfig and other utilities for viewing services.
8. Changed: The DLNA server will not try to convert URL's in the database even if conversion is forced. This allows URL's (like streaming radio) to be played on devices that support it (like WDTV).
9. Changed: The TiVo server will not try to convert URL's in the database even if conversion is forced. This should allow mp3 URL's (like shoutcast) to be played. Needs testing.
10. Changed: Improved internal volume mode handling for video and DVD playback.
16.0.123 (6/29/2011)
The same as 16.0.122 (numbering error)
Subscribe to:
Posts (Atom)
